Articles for "HD Sensor"

Vatech Sensor unable to aquire images into Dexis when bridge from Dentrix; when the workflow starts in Dentrix due to a “missing” driver.  Dentrix chart is opened, a bridge is initiated to open Dexis  EzSensor does not work. If Dexis is opened stand alone, the EzSensor will work normally. \Verify the Sensor is insta...

To setup the TWAIN Capture please reach out to Archy Support  Open Clinical  Imaging Select 'Settings' on the left hand side Navigate down the list to 'Imaging Profiles'   In order to set the rotations globally for the EzSensor in all templates, run through the Mount Preferences Setup under Setup Helpers:   F...

Windows 11 operating system & Up

Supported Hardware, Software and PC's:Before proceeding with Windows 11 update; please follow the following proceedure to ensure compatibility. Vatech America recommends you have your certified IT professional assist in any and all upgrade plans. Please be advised that Vatech is not responsible for any consequences resulted from the forcible up...

EzSensor: How to determine Pixal Size for 3rd party calibrationThe Sensor pixal Size is located in your user manual, this is typically found pages 6-9.EzSensor User manual can be Downloaded here:HD SensorsWave Sensors

EzSensor HD / Wave: The Dll file for this image processing does not exist. Occurs in EzDent-i as shown below. Can also occure in XrayVision products (XV, OneView, ImageXL)Copy the DllLocate the C:\EzSensor\ direcotry.  Copy libiomp5md.dll located in the EzSensor folderFor EzDent-i Users:Locate the C:\Program Files (x86)\VATECH\EzDent-i\Bin ...

Installation of EzSensor Twain & Install EzSensor Auto Advance / Auto Take function in Eaglesoft, Dexis and other software can be installed by downloading the following the AutoAdvance Twain. This guide will provide all files and folder in the link as it is, and run RYINstall.bat only You don’t need to open the folder.

IOS Delamination Check - EZSensor Image quality  You might get circles or marks showing in the image. These marks are caused by damage to the sensor such as hemostats or other tools not designed to be used. These kinds of damages are NOT covered under warrranty.

The following video is to be used to setup new installation Power management or troulbeshoot for random disconnect or 'I/O Device not found' message during aqusition.