Articles in "Ezdent-i" Category

In order to TWAIN DEXIS sensors into Vatech Software user must purchase the TWAIN license from DEXIS imaging. Once the user has purchased the license the following settings will need to be adjusted within the DEXIS TWAIN.

Configuration of EzDent-i for use with Microsoft based Email Note: Vatech Service is not able to support in the configuration or support of user configurations. Your IT person should assist in all aspects of configuration and inputting any configuration data.  EZSeries Version requirements: For the updated Security it is recommended to up...

In the event while scanning patient, the image does not save the STL file to EzDent-i follow the following steps to recover the unsaved image.   Open EzDent-i and open the desired patient chart as normal.  Under Click Aquisition Tab   click 'Import' , Select in the drop down 'IO Scanner   Select in the Modal...

In cases that the IP address changes; such as wireless netwokrs; changing domain or other IP address policy the IP address will need to be refreshed in EzServer Control pannel to update the updated IP address. Before proceeding; ensure the IP address is statically set and excluded from the network for the PC/Server hosting the Ezserver.  &nbsp...

Please consult with your qualified IT consultant or CareStack Support to add/edit clinical tool to link to CleverOne or EzDent-i.  The following is provided as a reference only and subject to change with out notice.Please contact CareStack Support  for any support related needs.Note: Vatech America service can not assist with linking...

When acquiring IOX images with Jazz Sensors to EzDent-i the images might be rotated incorrectly.

Open C:\Program Files (x86)\VATECH\EzDent-i\Setting Open the Twainconfig.ini Edit the USE_Twain20_DLL = ON or OFF  ON : Normally used for NEWER TWAIN source drivers OFF: Normally used for OLDER TWAIN source drivers

How to set up DTX Studio to launch from EzDent-i;  If you want DTX Studio to be your secondary (Optional) 3D Viewer, please make the adjustment under the 'Second 3D Viewer' as shown below.  If you want DTX Studio to be your primary 3D Viewer, please make this adjustment under 3D Viewer, using the steps shown below but using the &#...

To properly print and avoid any areas missing or not printed - Print Settings must Match the Template size

Backing up the Database: Please follow the following FAQ guide for determing where the database is located and what to backup:EzDent-i Backup GuideIt is highly recommended that this guide be used only by qualified IT Consultants to move or merge EZDent-i database in accordance with HIPAA retention regulations. All proper backups must be made in adv...