Articles in "EZ3D-i" Category

23 article(s) found in this category.
  • How to Install or update Implant Database for Ez3d-i

    Ez3D-i Implant library updates are typically conducted during 1st Quarter and 3rd Quater yearly. We recommend you check back often Download the Implant database installation files ,Click the EzServer link and select the Implant Database download Extract the Download once it has finished extracting. Run the Implant Database Setupwizard. Simply click...

    CONTINUE READING
  • How to Install EzSeries - EzServer, EzDent-i, Ez3d-i

    The Following guide is provided to assist in installing a site with either new or existing software. Please ensure this process is handled by a certified IT consultant to handle all aspects of the installation process. While this task is very simple we do recommend that only IT consultants follow these guides to ensure proper upgrade occurs and all...

    CONTINUE READING
  • Critical Update: EzServer WebService update - 3.0.7

     Critical Update: EzServer - WebService Launch.To prevent FileServer disconnected due to server reboots; updates; power outages and so on... Vatech is pleased to launch the latest version of EzServer that changes the VTfilemanager from Headed application to service version that no longer requires local login*. EZserver: 3.0.7 (Service Ver...

    CONTINUE READING
  • How to link to 3DDX sender from Ez3D-i

    Open Ez3D-i by either luanching CT image normally or from Exe shortcut on desktop.Once open you will want to click "Menu"Under the menu list, click "Settings"In the Linkage path; point to: C:\Program Files (x86)\VATECH\3DDX Sender\Bin\VT3DDXSender.exe then click Ok.You will need to exit and reload Ez3D-i with a CT image to refre...

    CONTINUE READING
  • Ez3D-i: How to choose CD/DVD to burn CD Viewer based on size

    Vatech america recommends that standard DVD -R should be used as a vast majority of the exports with the 3D Viewer exceed the 700MB limit to burn to a CD. Vatech's recommendation is to purchase & utilize DVD’s that have a capacity of 4.7GB that will allow all sizes FOV's to burn equally with out error or having to change between C...

    CONTINUE READING
  • How to Activate / Deactivate EzDent-i & Ez3D-i License

    Activation Process: 1. Before you begin you should have received a key list, typically this is located on the installation USB drive or Provided to you through order request, email and so on.Example Key List: Note: for 3D Users you will also have keys for Ez3D-i typically found in the same file. 2. Open the software that you are needing to update e...

    CONTINUE READING
  • EzDent-i/Ez3D-i: Failed to register

    Typically the Windows or network firewall might sometimes block the registration, normally turning off or disabling the firewall should allow the registration to proceed; in the event the firewall is not able to turn off, Please have your IT or Network admin contact Vatech support to add exception to the host file.  

    CONTINUE READING
  • Ez3D-i benefits of higher hardware capability requirement.

    Why does Ez3D-i require high end processing ability, typically what benifets are achivable as such?  Consultation / patient education videos STL overlay CBCT comparison – 3D-I allows you to overlay two CBCt’s – pre and post scans Smart clipping Sinus lift analysis Crown simulation Guide path simulation 3D pan with windowed cr...

    CONTINUE READING
  • How to configure Ez3D-i Auto BL/LB auto flip settings in Section View

    Having the Ez3D-i open, click the "Settings" > View Tab >2D View > select Curve BL/LB Display Option  From the Section tab click on Change Layout; select any layout that has MPR window:  Set the reference point for the auto flip by sliding the Green Triangle to the desired location(slider):  Now...

    CONTINUE READING
  • Quick Guide for Opening for Ez3D-i & Lite viewer

    How to open CD Viewer for Ez3D-i version 5.0.2

    CONTINUE READING