Articles in "Twain" Category

Vatech IOX using version 6.17 or newer will typically save the last image in the following directory: C:\EzSensor\BACKUP\ Here you can manually import the last image that was taken into your software. 

Installation of Sensor Install the EzSensor on to the PC in question   https://vatechamerica.com/faq/hardware-sensors/how-to-install-ezsensor  Please note that each individual EzSensor must be installed on each PC it will be used on  Default TWAIN MultiCapture TWAIN driver is installed at...

Vatech Sensor unable to aquire images into Dexis when bridge from Dentrix; when the workflow starts in Dentrix due to a “missing” driver.  Dentrix chart is opened, a bridge is initiated to open Dexis  EzSensor does not work. If Dexis is opened stand alone, the EzSensor will work normally. \Verify the Sensor is insta...

How to adjust XVCaputre - XRayVision Quality settings Images aquired in the SDK by XRayvision are managed by Image Processing and Post Capture filters inside X-ray vision. Vatech recommends reaching out to XRayvision support for changing any settings inside their software to ensure proper configuration. This guide is provided only as an example and...

3rd party Twain not saving into EzDent-i Image will take normally and pass into EzDent-i Image might be seen in Ezdenti but does not allow pressing the 'Save' button EzDent-i might not allow to move to next screen or save giving message can not move to other screen during aquisition process.

Installation of EzSensor Twain & Install EzSensor Auto Advance / Auto Take function in Eaglesoft, Dexis and other software can be installed by downloading the following the AutoAdvance Twain. This guide will provide all files and folder in the link as it is, and run RYINstall.bat only You don’t need to open the folder.

 Please enlarge the video full screen during playback.

Auto Pano & Insight Pano are special native functions that require the use of EzDent-i for full functionality. These special modalites are not able to capture and save into twain* 3rd party software. Vatech Recommends that you twain only Stardard 2D Pano/Ceph images into 3rd party IMS software. All other modes including Auto Pano and Insig...

First, make sure ALL twain settings are correct: Correct patientinfo.ini path and info Linkinfo.ini has the correct paths VATWAIN is configured properly (if used)Environment.ini and environment_twain.ini (if used)Second, test using TwackerTo set up twain to work within Tracker, you must select the Twain Device CMD option when trying to acquire. To ...

Vatech Software and Hardware Integration & TWAIN Guide for integration bridges from 3rd party practice management software to CleverOne, EzDent-i, Hardware devices such as Pano, Ceph, Sensor Intra-Oral Sensors twain into 3rd party Image management software integration chart.