Articles for "PaX-i Insight"

Checking exposure count can be accessed via the caputre program; located on the capture PC. Note: This only appies to 2D / 3D Extra Oral Units, Pax-i PCH-2500 and Higher*. Legacy units do not apply.  How to check Exposure Count: - First launch the capture program as you normally would if you were to take an image* from EzDent-i or IMS software...

If you would like to add the Clinic or Dr. name to the Panoramic Marker information (inidcated in read below)  this can be done by replacing the Manufacture information marker with the Clinic / Dr. name. Updateing Manufacture information markerTo update the Manufacture informaiton marker, we will access the User control pannel of the Capt...

Vatech’s manufacturer requirement is that all per-installation site checks must be done prior to any Vatech device installs, during any annual inspection or troubleshooting/repair to ensure proper power requirements are met and maintained.  The following is a brief overview of the power requirements that MUST be checked and resolved prior...

Regulatory documents can be found by choosing the product name below that matches your unit.       The following types of documents can be found are: X-Ray Dose & DAP Reports Scatter report & Leakage Reports Accaptance reports by model. Pax-i SeriesPax-i Paxi-3D Pax-i InsightPax-i3D SmartPax-i3D Smart RCPax-i3D...

Auto Pano & Insight Pano are special native functions that require the use of EzDent-i for full functionality. These special modalites are not able to capture and save into twain* 3rd party software. Vatech Recommends that you twain only Stardard 2D Pano/Ceph images into 3rd party IMS software. All other modes including Auto Pano and Insig...

UL listing is only but 1 of the many Nationally Recognized Testing Laboratory - registered Program. Any of the NRTL listed and approved programs can be used equally for anyThe NRTL - Recognizes private sector organizations to perform certification for certain products to ensure that they meet the requirements of both the construction and general in...

No - It is recommended that you use an IBM Compatible Windows based system; which you can export images to shared network storage by your IT professional. Please read full version for full details and important information.

Vatech Recommends your dealer technician access the following link to download the general PM schedule. Preventive Maintenance Schedule.PDF