Articles for "Green CT 2"

Checking exposure count can be accessed via the caputre program; located on the capture PC. Note: This only appies to 2D / 3D Extra Oral Units, Pax-i PCH-2500 and Higher*. Legacy units do not apply.  How to check Exposure Count: - First launch the capture program as you normally would if you were to take an image* from EzDent-i or IMS software...

SDK: Bridging 2D/3D Dolphin Imaging IntegrationFirst you will need to use a file labeled DolphinScan.ini.Downlaod: DolphinScan_greenX.iniThis file can be adjusted depending on the unit’s name to be launched within Dolphin Imaging. The image below was configured for a Green X but can be changed depending on the unit installed.Downlaod: Dolphin...

If you would like to add the Clinic or Dr. name to the Panoramic Marker information (inidcated in read below)  this can be done by replacing the Manufacture information marker with the Clinic / Dr. name. Updateing Manufacture information markerTo update the Manufacture informaiton marker, we will access the User control pannel of the Capt...

Please note the following procedure applies to All Pax-i, Paxi3D, Paxi3D Green , Smart3D  units and some other  P1 Equipped units that use "NCSW" (New Capture Soft Ware) as show below in the screen shots.Previous Legacy and Class B units are not equipped with this function. Opening Patient Chart & Launching Capture prog...

Download and install EzEval Tool & Manual. EzEval software will self-guide you through each step by clicking 'Next' to insure the platters are loaded properly.Download the EzEval Tool and Manuals  Following the installation manual. Use this guide as a reference in conjunction with the downloaded guide for checking. Extract the...

Regulatory documents can be found by choosing the product name below that matches your unit.       The following types of documents can be found are: X-Ray Dose & DAP Reports Scatter report & Leakage Reports Accaptance reports by model. Pax-i SeriesPax-i Paxi-3D Pax-i InsightPax-i3D SmartPax-i3D Smart RCPax-i3D...

Auto Pano & Insight Pano are special native functions that require the use of EzDent-i for full functionality. These special modalites are not able to capture and save into twain* 3rd party software. Vatech Recommends that you twain only Stardard 2D Pano/Ceph images into 3rd party IMS software. All other modes including Auto Pano and Insig...

Vatech Recommends your dealer technician access the following link to download the general PM schedule. Preventive Maintenance Schedule.PDF