Articles for "Dexis Imaging twain" Tag

3 article(s) found for this tag.
  • EzSensor: Unable to Aquire Image in Dexis Bridged from Dentrix

    Vatech Sensor unable to aquire images into Dexis when bridge from Dentrix; when the workflow starts in Dentrix due to a “missing” driver.  Dentrix chart is opened, a bridge is initiated to open Dexis  EzSensor does not work. If Dexis is opened stand alone, the EzSensor will work normally. \Verify the Sensor is insta...

    CONTINUE READING
  • How to configure DEXIS to use Vatech IOS/EOX TWAIN

    To configure DEXIS TWAIN you will either need to have purchased the DEXIS imaging for Version 9 or have already upgraded to DEXIS Version 10 or higher. The following guide is based on Version 10+ Note: For IOS - Sensors - Autoadvance TWAIN functions; you must have Dexis Version 10 or higher* using the Advanced - AutoAdvance Twain.   ...

    CONTINUE READING
  • Pano Images are chopped into many parts when saving to Dexis Imaging via Twain

    Dexis support multiple capture types; Intraoral as well as Ceph/Pano. Some cases if calling the scanner /Twain function of dexis from the I/O section (Noted in the software by a tooth icon) and separated by 1 to 4 lines the image will often time result as being chopped up into I/O sized images.To avoid this issue; the icon resembling the upper huma...

    CONTINUE READING