Articles for "Green X 12"

Windows 11 operating system & Up

Supported Hardware, Software and PC's:Before proceeding with Windows 11 update; please follow the following proceedure to ensure compatibility. Vatech America recommends you have your certified IT professional assist in any and all upgrade plans. Please be advised that Vatech is not responsible for any consequences resulted from the forcible up...

Checking exposure count can be accessed via the caputre program; located on the capture PC. Note: This only appies to 2D / 3D Extra Oral Units, Pax-i PCH-2500 and Higher*. Legacy units do not apply.  How to check Exposure Count: - First launch the capture program as you normally would if you were to take an image* from EzDent-i or IMS software...

SDK: Bridging 2D/3D Dolphin Imaging IntegrationFirst you will need to use a file labeled DolphinScan.ini.Downlaod: DolphinScan_greenX.iniThis file can be adjusted depending on the unit’s name to be launched within Dolphin Imaging. The image below was configured for a Green X but can be changed depending on the unit installed.Downlaod: Dolphin...

SDK, Integration, TWAIN compatibility chart.

The most common reason for E009 or E020.030.000 is the emergency stop switch. Locate the emergency stop switch located typically under the "Handle frame" this is the part of the arm that sticks out for patient to hold onto and supports the chin rest.Rotate the switch in the direction indicated by the arrows; if engaged typically it will 'pop' out when you turn it in the direction of the arrows and the unit will turn on.