Articles in "EZ3D-i" Category

While viewing the 3D Volume in Ez3D-i Click 'Main Menu' Select 'File Information' Contained in the File Information includes all scan data during the time of aquisition

Use the following guide to Activate/Deactivate the FLOATING LICENSE Key only.

EzSeries: EzServer- PostGres9.2 and EzWebServer Compatibility guideThe following systems are supported and compatible.Server OS: Server 2012 to 2019Windows OS: Windows 10  Windows 11 Non- Supported: Server 2022 - To be determined* (EwooSoft is currently in development for Server 2022)Server 2008 and olderWindows 7 and Older.

EzSeries: EzDent-i, Ez3D-i Firewall Port number exclusion listThe following port numbers will be the default ports for firewall routing rules allowing in/out for both TCP/IP & UDP. PostGres: 5432VTFilemanager & EzWebServer  43112 55001 55005 9100 44402 44403Messaging server: 44401 ~ 44408 44409

How to configure Nvidia settings for opital settings for running Ez3D-i. Ensure GPU is proper specifications as Outlined on Vatech.us Viewer requirements. Running the optimal settings will increase the proper performance of Ez3D-i Related sluggish operation or poor performance issue might be resolved by proper settings.

EzSeries: EzDent-i & Ez3D-i Workstation Requirements can be found by viting the remote support ; Workstation Requirements. Note: For workstations using only EzDent-i; GPU requirement can be ommitted.

Ez3D-i Implant library updates are typically conducted during 1st Quarter and 3rd Quater yearly. We recommend you check back often Download the Implant database installation files ,Click the EzServer link and select the Implant Database download Extract the Download once it has finished extracting. Run the Implant Database Setupwizard. Simply click...

The Following guide is provided to assist in installing a site with either new or existing software. Please ensure this process is handled by a certified IT consultant to handle all aspects of the installation process. While this task is very simple we do recommend that only IT consultants follow these guides to ensure proper upgrade occurs and all...

Open Ez3D-i by either luanching CT image normally or from Exe shortcut on desktop.Once open you will want to click "Menu"Under the menu list, click "Settings"In the Linkage path; point to: C:\Program Files (x86)\VATECH\3DDX Sender\Bin\VT3DDXSender.exe then click Ok.You will need to exit and reload Ez3D-i with a CT image to refre...

Vatech america recommends that standard DVD -R should be used as a vast majority of the exports with the 3D Viewer exceed the 700MB limit to burn to a CD. Vatech's recommendation is to purchase & utilize DVD’s that have a capacity of 4.7GB that will allow all sizes FOV's to burn equally with out error or having to change between C...