Articles for "EzDent-i"

When acquiring IOX images with Jazz Sensors to EzDent-i the images might be rotated incorrectly.

DentiMax Dream IOX TWAIN - AutoAdvance  DentiMax TWAIN Driver UI has a tray icon where it can be configured for single shot or multi-shot.DentiMax Sensor Image Quality Configurations   DentiMax has a config.ini file with image preprocessing values that can be configured located in : C:\ProgramData\DentiMax\ Customer should call ...

Open C:\Program Files (x86)\VATECH\EzDent-i\Setting Open the Twainconfig.ini Edit the USE_Twain20_DLL = ON or OFF  ON : Normally used for NEWER TWAIN source drivers OFF: Normally used for OLDER TWAIN source drivers

How to set up DTX Studio to launch from EzDent-i;  If you want DTX Studio to be your secondary (Optional) 3D Viewer, please make the adjustment under the 'Second 3D Viewer' as shown below.  If you want DTX Studio to be your primary 3D Viewer, please make this adjustment under 3D Viewer, using the steps shown below but using the &#...

To properly print and avoid any areas missing or not printed - Print Settings must Match the Template size

Backing up the Database: Please follow the following FAQ guide for determing where the database is located and what to backup:EzDent-i Backup GuideIt is highly recommended that this guide be used only by qualified IT Consultants to move or merge EZDent-i database in accordance with HIPAA retention regulations. All proper backups must be made in adv...

First you will want to have the Scan saved locally to file; for this guide we will use the folder called 'Import' and the image named "Pano" located on the desktop. Next open EzDent-i and pull up the patient to save the image to; if not already entered enter it now. For this example we will be using the Vatech Test patient.No...

When Exporting Dicom images to 3Shape images; some labs might experience an error when trying to open the scan.Please follow the Export the scan using Ez3D-i guide, using 'Export to Memory/USB' option, If exporting the Dicom set results in Error Processing Tag message when exporting from EzDent-i. 

In some limited cases, consult videos might not display properly when file path has been changed. Be sure to check both the config.ini file path for the data as well as the VTFilemanager file path matches the specified data path. If they are not the same file path, Follow the Guide to Change the filepath in the VTFilemanager to match the Config.ini...

EzShare enables the electronic transfer of data - for sharing files from EzDent-i and sharing to 3rd party software. Use the following guides to assist you with setting up your EzShare and how to use the software. How to Activate/Configure EzShare & Sending Images: This video is intinded for the sending practice to activate EzShare and send ima...