Please use the following search box to quickly locate valuable FAQ support guide.
You can use key words or full statement to search by. Alternatively you can simply browse by Category belowEzCam Installation:
To use EzCam in 3rd party software you will need to please follow the installation video
EzCam: Plug and Play
Under normal conditions EzCam is plug and play and does not require additional drivers to work. Windows OS should automatically detect the camera and pick up any camera feed. However Vatech does offer for more advanced functions the EzCam TWAIN driver when needed.
EzCam: Twain Installation for 3rd party software
1. Connect the Camera.
2. Open NotePad Or Word.
3. Press buttons 1 and 2 at the same time and wait for a few moments.
4. A buzzer sounds after about 3 seconds.
5. After the buzzer sounds, press 1 repeatedly while keeping button 2 pressed.
Then in notepad displays /a~/u in order.
(*This information may change depending on each software version upgrade.)
6. To complete the setting depress button 2.
The following key combinations are typically the Keyboard Short-cuts for each software as listed in the table below:
